Qucs File Formats¶
This document describes the schematic and library file formats of Qucs.
Schematic file format¶
This format is used for schematics (usually with suffix .sch
) and for data
displays (usually with suffix .dpl
). The following text shows a short
example of a schematic file.
<Qucs Schematic 0.0.6>
<Properties>
<View=0,0,800,800,1,0,0>
</Properties>
<Symbol>
<.ID -20 14 SUB>
</Symbol>
<Components>
<R R1 1 180 150 15 -26 0 1 "50 Ohm" 1 "26.85" 0 "european" 0>
<GND * 1 180 180 0 0 0 0>
</Components>
<Wires>
<180 100 180 120 "" 0 0 0 "">
<120 100 180 100 "Input" 170 70 21 "">
</Wires>
<Diagrams>
<Polar 300 250 200 200 1 #c0c0c0 1 00 1 0 1 1 1 0 5 15 1 0 1 1 315 0 225 "" "" "">
<"acnoise2:S[2,1]" #0000ff 0 3 0 0 0>
<Mkr 6e+09 118 -195 3 0 0>
</Polar>
</Diagrams>
<Paintings>
<Arrow 210 320 50 -100 20 8 #000000 0 1>
</Paintings>
The file contains several section. Each of it is explained below.
Every line consists of not more than one information block that starts
with a less-sign <
and ends with a greater-sign >
.
Propiedades¶
The first section starts with <Properties>
and ends with
</Properties>
. It contains the document properties of the file. Each
line is optional. The following properties are supported:
<View=x1,y1,x2,y2,scale,xpos,ypos>
contains pixel position of the schematic window in the first four numbers, its current scale and the current position of the upper left corner (last two numbers).<Grid=x,y,on>
contains the distance of the grid in pixel (first two numbers) and whether grid is on (last number 1) or off (last number 0).<DataSet=name.dat>
contains the file name of the data set associated with this schematic.<DataDisplay=name.dpl>
contains the file name of the data display page associated with this schematic (or the file name of the schematic if this document is a data display).<OpenDisplay=yes>
contains 1 if the data display page opens automatically after simulation, otherwise contains 0.<Script=name.m>
contains the file name of the octave script associated with this schematic.<RunScript=0>
contains 1 if the octave script is executed after the simulation.<showFrame=0>
specify if a frame is drawn and if so which size it is. valid values are 0 (do not show a frame), 1 (A5 landscape), 2 (A5 portrait), 3 (A4 landscape), 4 (A4 portrait), 5 (A3 landscape), 6 (A3 portrait), 7 (letter landscape) and 8 (letter portrait).<FrameText0=NE555 sub-circuit model>
,FrameText1=Draw by: anonymous
,FrameText2=Date: 1984
, and<FrameText3=Revision: 42>
specifiy the texts to be placed into the frame text boxes.
Symbol¶
This section starts with <Symbol>
and ends with </Symbol>
. It
contains painting elements creating a schematic symbol for the file.
This is usually only used for schematic files that meant to be a
subcircuit.
Refers to “Symbol definition” in the “Shared file format” section at the end of this document.
Componentes¶
This section starts with <Components>
and ends with </Components>
.
It contains the circuit components of the schematic. The line format is
as follows:
<type name active x y xtext ytext mirrorX rotate "Value1" visible "Value2" visible ...>
- The
type
identifies the component, e.g.R
for a resistor,C
for a capacitor. - The
name
is the unique component identifier of the schematic, e.g.R1
for the first resistor. - A
1
in theactive
field shows that the component is active, i.e it is used in the simulation. A0
shows it is inactive. - The next two numbers are the x and y coordinates of the component center.
- The next two numbers are the x and y coordinates of the upper left corner of the component text. They are relative to the component center.
- The next two numbers indicate the mirroring about the x axis (
1
for mirrored,0
for not mirrored) and the counter-clockwise rotation (multiple of 90 degree, i.e. 0...3). - The next entries are the values of the component properties (in
quotation marks) followed by an
1
if the property is visible on the schematic (otherwise0
).
Wires¶
This section starts with <Wires>
and ends with </Wires>
. It
contains the wires (electrical connection between circuit components)
and their labels and node sets. The line format is as follows:
<x1 y1 x2 y2 "label" xlabel ylabel dlabel "node set">
- The first four numbers are the coordinates of the wire in pixels: x coordinate of starting point, y coordinate of starting point, x coordinate of end point and y coordinate of end point. All wires must be either horizontal (both x coordinates equal) or vertical (both y coordinates equal).
- The first string in quotation marks is the label name. It is empty if the user has not set a label on this wire.
- The next two numbers are the x and y coordinates of the label or zero if no label exists.
- The next number is the distance between the wire starting point and the point where the label is set on the wire.
- The last string in quotation marks is the node set of the wire, i.e. the initial voltage at this node used by the simulation engine to find the solution. This is empty if the user has not set a node set for this wire.
Diagrams¶
This section starts with <Diagrams>
and ends with </Diagrams>
. It
contains the diagrams with their graphs and their markers.
The line format is as follows (line break not allowed):
<diatype x y width height grid gridcolor gridstyle log xAutoscale xmin
xstep xmax yAutoscale ymin ystep ymax zAutoscale zmin zstep zmax
xrotate yrotate zrotate "xlabel" "ylabel" "zlabel" "[freq Hz;]*">
<"graphvar" color thickness precision numberformat style axisside>
<Mkr x y precision numberformat transparent>
</diatype>
Diagram line format:
- The
diatype
token specifies the type of diagram. - The
x
andy
numbers are the coordinate of lower left corner. - The
width
andheight
numbers of diagram boundings. - The
grid
flags with 1 if grid is on and 0 if grid is off. - The
gridColor
in 24 bit hexadecimal RGB value, e.g. #FF0000 is red. - The
gridstyle
is the line style sued of the grid. - The
log
has two field to flag which axes have logarithmical scale. - The
xAutoscale
,xmin
,xstep
,xmax
configure the x-axis scaling, limits. - The
yAutoscale
,ymin
,ystep
,ymax
configure the y-axis scaling, limits. - The
zAutoscale
,zmin
,zstep
,zmax
configure the z-axis scaling, limits. - The
xrotate
,yrotate
,zrotate
numbers set the 3D rotation. - The
xlabel
,ylabel
,zlabel
hold the labels used on each axis. - The list of frequencies
"[freq Hz;]*"
is used byPhasor
andWaveac
.
Here is a list of known diagram types:
Curve
for a locus curve diagram.Smith
for an impedance Smith diagram.ySmith
for an admittance Smith diagram.PS
for a mixed polar/smith diagram.SP
for a upper-half mixed polar/smith diagram.Polar
for a polar diagram.Rect
for a 2D-cartesian diagram.Rect3D
for a 3D-cartesain diagram.Tab
for a tabular diagram.Time
for a timing diagram.Truth
for a truth-table diagram.Phasor
for a complex phasor diagram.Waveac
for a wave as temporal diagram.
Graph line format:
- The
graphvar
specify the variable this graph is plotting for. - The
color
,thickness
andstyle
refers to the pen used to draw the curve. - The
precision
specify the number of digits used when displaying data values. - The
numberformat
is an integer that specify how the number are formated (0 for real/imag, 1 for polar/deg and 2 for polar/rad). - The
axisside
is an integer indicating on which side the Y axis should be placed ().
Marker line format:
- The
x
andy
are the location of the marker. - The
precision
... - The
numberformat
... - The
transparent
Paintings¶
This section starts with <Paintings>
and ends with </Paintings>
.
It contains the paintings that are within the schematic.
Refers to “Shared file format” section below.
Library file format¶
This format is used for libraries (usually with suffix .lib
). The
following text shows a short example of a library file.
<Qucs Library 0.0.14 "Ideal">
<DefaultSymbol>
<.ID -26 13 D>
<Line -30 0 60 0 #000080 2 1>
<Line -6 -9 0 18 #000080 2 1>
<Line 6 -9 0 18 #000080 2 1>
<Line -6 0 12 -9 #000080 2 1>
<Line -6 0 12 9 #000080 2 1>
<Line -6 9 4 0 #000080 2 1>
<.PortSym -30 0 1 0>
<.PortSym 30 0 2 180>
</DefaultSymbol>
<Component VSum>
<Description>
Voltage adder
</Description>
<Model>
.Def:Ideal_AP1 _net3 _net2 fc="1E3"
Sub:VSUB1 _net0 _net1 _net2 Type="VSub"
Sub:LP1F1 _net3 _net0 Type="LP1" fc="fc2" V0="0"
Sub:HP1F1 _net3 _net1 Type="HP1" fc="fc2"
Eqn:Eqn1 fc2="fc/0.6436" Export="yes"
.Def:End
</Model>
<ModelIncludes "HP1.sch.lst" "LP1.sch.lst" "VSub.sch.lst">
<Symbol>
<Ellipse -20 -20 40 40 #000080 2 1 #c0c0c0 1 0>
<Line -10 0 20 0 #000080 1 1>
<Line 0 -10 0 20 #000080 1 1>
<Line 0 30 0 -10 #000080 2 1>
<.PortSym 0 30 2 0>
<.PortSym 30 0 3 180>
<Line 20 0 10 0 #000080 2 1>
<.ID 10 14 VADD>
<Line 0 -20 0 -10 #000080 2 1>
<.PortSym 0 -30 1 0>
</Symbol>
</Component>
The first line specify that this file is a Qucs library file generated by Qucs 0.0.14 and that the library is named “Ideal”.
The file contains on optional DefaultSymbol
section, followed by
Component
sections. Each section is explained below.
Default symbol¶
This section starts with <DefaultSymbol>
and ends with </DefaultSymbol>
.
It contains painting elements creating a default schematic symbol for any
subsequent component declaration that doesn’t define its own.
Refers to “Shared file format” section below.
Component¶
This section starts with <Component>
and ends with </Component>
. It
contains the component definition for use with schematic documents.
The component section is an aggregation of the following sub-sections:
<Description>
and</Description>
contain lines of free text describing the component function.<Model>
and</Model>
contain the Qucsator netlist lines for this component.<ModelIncludes "value0" "value1" ...>
...<Spice>
and</Spice>`
are optional and contain the Spice netlist lines for this component.<Symbol>
and</Symbol>
are optional and contain painting elements defining the schematic symbol to be used with this component. Refers to “Symbol definition” section below.